Better performance in the process and on the environmental side of the business.
Essential thickening performance for those who need to reach critical dewatering
objectives.
MDS in de-inking sludge thickening service,
prior to screw press. The advantage that the MDS delivers in dryer solids was required
to meet with the dry solids required from the press (50%+).
The de-inking sludge comes off of flotation
clarifiers at 2-3%, with as much as 40% clay or ash. The solids come off our MDS
at 12 to 15 to 18% allowing the press to meet its
goal.
Two MDS units in fiber recovery service. The
BAYCOR advantage was required to capture fiber that was previously lost to treatment.
The recovered fiber is also cleaned and thickened
at the same time. Exceptional MDS performance — each unit recovers more than 6 to
9 tons of fiber per day, achieving payback in weeks after installation.
Two MDS units in secondary (waste activated)
sludge thickening service. Feed of <1% is pretreated with polymer at about 6 to
9 kg/ton of dry solids.
The BAYCORE FIBRE TECH INC. MDS system thickens
the secondary sludge to 8 to 10% consistently. The BAYCOR advantage was required
to achieve dry solids content that would allow blending of the thickened WAS with
thickened primary sludge to allow for effective dewatering in a screw press, prior
to burning of the pressed solids.
Fiber Recovery
